Process Diagram

Band 4+: Geothermal energy is used to produce electricity. Summarise the information by selecting and reporting main features and make comparison where relevant

See all user-written answers on this topic

Image for topic: Geothermal energy is used to produce electricity. Summarise the information by selecting and reporting main features and make comparison where relevant

Our system will evaluate the answer based on this AI-generated description.

The image details geothermal power plant process: Cold water at 1 is injected 4.5 km down at 2 into geothermal zone (hot rocks), heated water surfaces at 3 through production well, hot water piped to heat exchanger that powers turbine at 4 to activate generator at 5 for electricity, steam is condensed back at 6, bottled as condenser.

Given the complexity of the image, the above description may not be entirely accurate.

Skyrocket your IELTS band score by 1-2 points in under a month with our premium plan!

Check it out

Note: Both the topic and the answer were created by one of our users.

The diagram illustrates the process by which geothermal power is utilized to generate electricity.

Overall, it consists of 5 distinct stages, beginning with cold water injected deep down and ending with electricity generate.

Initially, the cold water pumped 4.5km beneath the ground which is then injected through the hot rocks also known as geothermal zone. Following this, it undergoes though production well where the hot water goes up to the condenser. After being condense, the steam goes through Turbine which is powered by it and through the assist of turbine it powered the generator to generate electricity. Then, the generated electricity is passed in power plant .

Word Count: 107

Check Your Answer On This Topic?

Check My Answer

Generate A Band-9 Sample Answer?

Generate A Sample

Overall Band Score

4.5

(+/- 0.5)

Vocabulary Complexity:
C2 - Complex
Continue to challenge and refine your language choices.

Grammar Mistakes: N/A

Vocabulary Repetition:

which: 3

water: 3

electricity: 3

through: 3

Try using synonyms for the above words

Task Response

The report identifies the main stages of the geothermal power generation process, but the description lacks detail and clarity. There are inaccuracies in describing the process (e.g., the water is not condensed before going to the turbine). The organization is acceptable, but the language could be more precise and coherent. To improve, focus on providing more specific details about each stage and ensuring the accuracy of the information presented. Also, work on using more precise language and improving the overall flow of the report. The report falls short of the required 150 words.

Coherence & Cohesion

The report provides a general overview of the process, but the description of the stages could be clearer and more logically sequenced. The flow of information could be improved by using more precise transition words and phrases to guide the reader through the process. Paragraphing is adequate, but could be enhanced by grouping related ideas more effectively.

Lexical Resource

The vocabulary used is generally appropriate for the task, but there is room for improvement in terms of precision and variety. Consider using more specific terms related to geothermal energy production to enhance the technical accuracy of the description. For example, instead of 'goes up to the condenser,' you could use a more descriptive phrase like 'is piped to a heat exchanger.' Also, avoid repetition of words.

Grammatical Range & Accuracy

The report contains several grammatical errors, including incorrect verb tenses ('electricity generate' should be 'electricity is generated'), missing articles ('through Turbine' should be 'through the turbine'), and awkward phrasing ('through the assist of turbine it powered the generator'). These errors affect the clarity and accuracy of the description. Focus on using correct verb forms, articles, and sentence structures to improve grammatical accuracy.

Answers On The Same Topic:

Geothermal energy is used to produce electricity. Summarise the information by selecting and reporting main features and make comparison where relevant

The given diagram illustrates the process of producing electricity from using the heat from geothermal zones. Overall, it is apparent that the process contains five main stages, starting with pumping cold water into the underground and ending with generating electricity by a generator. Another key feature is that this process is completely environmentally friendly and […]

Band 7+

Geothermal energy is used to produce electricity. Summarise the information by selecting and reporting main features and make comparison where relevant

The picture illustrates the way that electricity is produced by geothermal energy. Overall, this process contains five main stages, which begins with cold water, continues underground between hot rocks, and ends with generator. Initially, cold water, that is reserved on the ground, is pumped down into the ground for about 4.5 km to the injection […]

Band 6+

Geothermal energy is used to produce electricity. Summarise the information by selecting and reporting main features and make comparison where relevant

The diagram below illustrates how geothermal energy is used to generate electricity. Overall, there are five distinct stages in the process of electricity production from geothermal power. Beginning with the injection of cold water underground and concluding with electricity generation by a turbine-driven generator. At first, cold water is pumped through a pipeline approximately 4,5km […]

Band 7+

Geothermal energy is used to produce electricity. Summarise the information by selecting and reporting main features and make comparison where relevant

The given diagram gives information about the process of producing electricity using geothermal energy. Overall, there are five main steps in the transfer of electricity using geothermal energy, starting with cold water transfer to the generator for use. To begin, cold water is pumped down from a height of 150 km underground. The injection well […]

Band 7+

See All

the three pictures below show three different kinds of bridges

The diagram compares three different kinds of bridges. Overall, there are differences in the design of each bridge, basing on 3 locations such as lake, river, and sea. Besides, different sizes of ships allow them to sail under sort of bridges. As can be seen from the diagram, looking at the arch bridge, as the […]

Band 6+

The diagram below shows how a Vietnamese 'banh chung' is made

The depiction below explicates the method of crafting a Vietnamese “Banh Chung”. Overall, the process of making a Vietnamese “Banh Chung” adheres to a linear, multi-stage sequence with 10 distinct steps. The journey of a Vietnamese “Banh Chung” commences with soaking glutinous rice overnight and culminates in serving to consumers with spices. In the initial […]

Band 7+

The diagram below shows how a Vietnamese 'banh chung' is made

The depiction below explicates the method of crafting a Vietnamese “Banh Chung”. Overall, the process of making a Vietnamese “Banh Chung” adheres to a linear, multi-stage sequence with 10 distinct steps. The journey of a Vietnamese “Banh Chung” commences with soaking glutinous rice overnight and it culminates in serving to consumers with spices. In the […]

Band 6+

The diagram illustrates the life cycle of the honey bee.

The diagram illustrates the stages involved in the cycle life of the honey bee. From an overall perspective, it is evident that the cycle comprises six consecutive steps in total, commencing with the hatching of eggs and culminating in the laying of the new eggs by the female bees. To begin with, the life of […]

Band 8+

The diagram below shows the operation of a combine harvester on a farm. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The diagram illustrates the process of the operation of a combine harvester on a farm. Overall, the process has seven stages, beginning with cutting the crops and ending with unloading the grain. The process can divided into two phases, the primary check stages, and the secondary practical stages. Firstly, the crops are cutted by maichens, […]

Band 4+

The diagram below shows the manufacturing process of perfume. Summarise the information by selecting and reporting the main features and make comparisons where relevant.

The diagram shows how the perfume is produced, from the raw materials until the finished product is packaged. Overall, the process is linear and has ten stages in total. It begins with the preparation of raw materials and it finishes with the packaging. All of the stages are man-made and take place in a factory. […]

Band 8+

See All

Check Your Answer On This Topic?

Generate A Band-9 Sample Answer?

Overall Band Score

Task Response

Coherence & Cohesion

Lexical Resource

Grammatical Range & Accuracy

Answers On The Same Topic:

Other Topics:

Plans & Pricing

Free

Premium