Process Diagram

Band 6+: The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

See all user-written answers on this topic

Image for topic: The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

Our system will evaluate the answer based on this AI-generated description.

The image features two schematic diagrams detailing the components of a space vehicle before and after assembly. The top diagram, titled "The Orion Rocket (before assembly)," shows a vertically oriented rocket with labeled parts from top to bottom: "Crew module (and launch escape system)," "Service module," central "Fuel tank (orange)," "Engine (underneath)," and two flanking "Solid rocket boosters (white)." The bottom diagram, titled "The Orion Spacecraft (after assembly)," depicts a horizontally oriented craft showing "Solar panels (added)" extending from the top and bottom, the "Service module (attached)" at the rear/left, the "Crew module (inside)" revealed in a cutaway section, and the "Launch escape system (attached)" positioned at the forward/right tip.

Given the complexity of the image, the above description may not be entirely accurate.

Skyrocket your IELTS band score by 1-2 points in under a month with our premium plan!

Check it out

Note: Both the topic and the answer were created by one of our users.

The layout illustrates the construction of the Orion spaceship before assembly and after take off.

Overall, it is clear to see that there is a beginning version of craft without new features that will be added after launch.

In the unassembled rocket stage, the construction is stayed vertically and had 3 main parts. At the top of the rocket there is a crew module with launch escape system. Service module is located below crew station. The biggest part of the spacecraft is fuel tank and it is located in the middle of spaceship. There is also an engine at the bottom of this construction. From both sides of it, there are two solid rocket boosters.

In the assembled spacecraft, most of the top of the aircraft remained as it was in the past (crew module, launch escape system and service module). However, there are some new features added, such as solar panels. Solar panels located on the both sides of the assembled spaceship, near to the module.

Word Count: 167

Check Your Answer On This Topic?

Check My Answer

Generate A Band-9 Sample Answer?

Generate A Sample

Overall Band Score

(+/- 0.5)

Vocabulary Complexity:
B1 - Intermediate
Using more sophisticated words could be beneficial.

Grammar Mistakes: N/A

Vocabulary Repetition:

there: 5

module: 4

construction: 3

spaceship: 3

rocket: 3

located: 3

Try using synonyms for the above words

Task Response

The report addresses the task by describing both stages of the spacecraft, but it contains some inaccuracies and omissions. The overall structure is clear, with an introduction and separate paragraphs for before and after assembly. However, the description of the assembled spacecraft is incomplete, as it does not mention the cutaway view of the crew module or the horizontal orientation. Additionally, the phrase 'after take off' is inaccurate, as the diagrams show assembly, not launch. The report would benefit from a more precise and complete description of the changes, including the addition of solar panels and the attachment of the service module and launch escape system.

Coherence & Cohesion

The report has a clear overall structure with an introduction, overview, and two body paragraphs. However, the flow is sometimes disrupted by awkward phrasing and unclear referencing (e.g., 'the construction is stayed vertically' and 'most of the top of the aircraft remained as it was in the past'). The use of cohesive devices is limited, and some sentences are overly long or run-on. To improve, use clearer topic sentences, vary linking words, and ensure each paragraph focuses on a single main idea.

Lexical Resource

The vocabulary is adequate for the task, with some appropriate terms like 'crew module', 'launch escape system', 'service module', and 'solar panels'. However, there is limited range and some imprecise word choices (e.g., 'construction' instead of 'rocket' or 'spacecraft', 'aircraft' instead of 'spacecraft', 'beginning version' instead of 'initial version'). To improve, use more precise and varied vocabulary, and avoid repetition. Also, ensure correct collocations (e.g., 'located on both sides' instead of 'located on the both sides'). Boost vocabulary complexity to elevate the overall score.

Grammatical Range & Accuracy

The report uses a mix of simple and complex structures, but there are several grammatical errors that affect clarity. Examples include 'the construction is stayed vertically' (incorrect passive), 'Service module is located below crew station' (missing article), and 'Solar panels located on the both sides' (missing verb and incorrect article). Punctuation is mostly correct, but some sentences are run-ons. To improve, focus on subject-verb agreement, correct use of articles, and ensure each sentence has a clear main verb. Also, vary sentence structures to demonstrate greater grammatical range.

Answers On The Same Topic:

The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The provided diagrams display the parts of the Orion spacecraft before and after it is assembled. Overall, the rocket consists of several separate parts, whereas the assembled spacecraft is a single, more compacted construction. The fuel tank, engine and boosters are not visible outside of the final version, while solar panels are the only new […]

Band 7+

The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The diagrams illustrate the main components of the Orion rocket before assembly and the configuration of the spacecraft after assembly. Overall, the initial design consists of a tall central structure flanked by two solid rocket boosters, whereas the assembled spacecraft is shown as a compact unit comprising the crew and service modules, together with the […]

Band 9

The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The two diagrams illustrate the disassembled Orion spacecraft and the assembled Orion spacecraft with modifications. Overall, while the scheme of the spacecraft involves only main parts, which are essential for movement, before the assembly process, the second scheme includes several modifications for safety, charging and comfort. The Orion spacecraft before the assembling had a crew […]

Band 7+

See All

The diagram below shows the process of producing instant coffee. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The diagram illustrates the several stages of producing instant coffee from beans. Overall, there are eleven stages involved in the process of making instant coffee. The process begins with pick the coffee beans from crops and ends with beans pack into the jars. To begin with, the coffee beans are picked from the crops, then […]

Band 7+

the diagram show the process of water treatment, Summarise the information by selecting and reporting the main features

The depicted diagram represents the procedure of water treatment. In overview, the process contains 10 major steps, from intake screens and faucet. Primarily, the process of intake screens help in filtering the water, so that it can pass through further eassily. Secondly, the filtered water, gets pumped through the machine so it can pass ahead. […]

Band 5+

the diagram show the process of water treatment, Summarise the information by selecting and reporting the main features

The diagram explains the way in which water is treated. Overall, the process consists of 10 stages, starting with the intake screens and ending up with the faucet. It also includes some steps such as pumps, flocculations, settling basin, filter membrane and other. First of all, water comes from the special tank through the intake […]

Band 7+

The diagram below shows the process by which bricks are manufactured for the building industry. Brick Manufacturing

The diagram represents the step-by-step process of producing bricks for the building industry. Overall, the process can be divided into three primary stages, starting from digging the clay, followed by the hardening process, and ending with delivering to the construction sites. Notably, the process involves several machines and limited amount of human involvement. In the […]

Band 9

The diagram below gives the infromation about the Hawaiian island chain in the centre of the Pacific Ocean.

The diagram illustrates how the Hawaiian island chain forms in the central Pacific Ocean. It also shows the locations of the main islands in the chain. Overall, the islands develop through repeated volcanic eruptions. As the Pacific tectonic plate moves, older volcanoes are carried away from the area of volcanic activity, while new volcanoes continue […]

Band 9

See All

Check Your Answer On This Topic?

Generate A Band-9 Sample Answer?

Overall Band Score

Task Response

Coherence & Cohesion

Lexical Resource

Grammatical Range & Accuracy

Answers On The Same Topic:

Other Topics:

Plans & Pricing

Free

Premium