Process Diagram

Band 6+: The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

See all user-written answers on this topic

Image for topic: The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

Our system will evaluate the answer based on this AI-generated description.

The image features two schematic diagrams detailing the components of a space vehicle before and after assembly. The top diagram, titled "The Orion Rocket (before assembly)," shows a vertically oriented rocket with labeled parts from top to bottom: "Crew module (and launch escape system)," "Service module," central "Fuel tank (orange)," "Engine (underneath)," and two flanking "Solid rocket boosters (white)." The bottom diagram, titled "The Orion Spacecraft (after assembly)," depicts a horizontally oriented craft showing "Solar panels (added)" extending from the top and bottom, the "Service module (attached)" at the rear/left, the "Crew module (inside)" revealed in a cutaway section, and the "Launch escape system (attached)" positioned at the forward/right tip.

Given the complexity of the image, the above description may not be entirely accurate.

Skyrocket your IELTS band score by 1-2 points in under a month with our premium plan!

Check it out

Note: Both the topic and the answer were created by one of our users.

The diagrams demonstrates the parts of the Orion spacecraft before and after it is assembled.

Overall, it can be seen that Orion rocket before assembly consisted several separate components, whereas assembled spacecraft is a single and more compact construction. The fuel tank, engine and two solid boosters do not appear in the final version, while solar panels are the only new components.

Before assembly, the spacecraft consisted several separate components. At the centre is a orange fuel tank, with engine positioned underneath it. At the top there is a service module, crew module and launch escape system. Two soild boosters positioned separately on either side of the main rocket.

After being assembled, crew module and launch escape system are placed separately, with the former placed inside, and launch escape system attached to the spacecraft. Similarly, service module is secured to the end of the construction. Looking at new details, solar panels are added on two sides of the spacecraft.

Word Count: 159

Check Your Answer On This Topic?

Check My Answer

Generate A Band-9 Sample Answer?

Generate A Sample

Overall Band Score

6.5

(+/- 0.5)

Vocabulary Complexity:
C1 - Intricate
Strive to incorporate even richer and more precise language.

Grammar Mistakes: N/A

Vocabulary Repetition:

spacecraft: 5

module: 4

launch: 3

escape: 3

system: 3

Try using synonyms for the above words

Task Response

The report provides a clear and relevant overview of the main features of the assembly process, and it makes appropriate comparisons between the before and after states. The structure is logical, with an introduction, an overall summary, and separate paragraphs for the before and after stages. However, there are a few minor inaccuracies and omissions: the report states that the fuel tank, engine, and boosters do not appear in the final version, which is not explicitly shown in the visual description, and it incorrectly places the service module at the top before assembly (it should be below the crew module). Additionally, the report could have mentioned the horizontal orientation of the assembled spacecraft and the cutaway view of the crew module. These are minor lapses that do not detract significantly from the overall task achievement.

Coherence & Cohesion

The report has a clear overall structure with an introduction, overview, and two body paragraphs. However, the flow is sometimes disrupted by awkward phrasing and unclear referencing (e.g., 'with the former placed inside' is vague). The paragraphing is logical, but the second body paragraph could be more clearly organized to separate the description of the assembled components from the new additions. To improve, use clearer cohesive devices and ensure each paragraph has a clear central idea.

Lexical Resource

The vocabulary is generally appropriate for the task, with some good use of terms like 'separate components,' 'compact construction,' and 'secured to the end.' However, there are some inaccuracies and repetitions (e.g., 'soild' for 'solid,' 'positioned' used multiple times). The range of vocabulary is limited, and more precise and varied language could be used to describe the parts and their relationships. To improve, expand your lexical range and ensure correct spelling and word choice.

Grammatical Range & Accuracy

The report uses a mix of simple and complex structures, but there are several grammatical errors that affect clarity. For example, 'The diagrams demonstrates' should be 'The diagrams demonstrate,' and 'consisted several separate components' should be 'consisted of several separate components.' There are also issues with articles and prepositions (e.g., 'a orange fuel tank' should be 'an orange fuel tank,' 'positioned separately on either side' could be improved). To improve, proofread for subject-verb agreement, article usage, and prepositions, and aim for more varied sentence structures.

Answers On The Same Topic:

The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The diagrams demonstrate the parts of the Orion spacecraft before and after it is assembled. Overall, the rocket consists of several seperate parts, whereas the assembled spacecraft is a single, more compact construction. The fuel tank, engine, and boosters do not appear in the final version, while solar panels are the only new components. Before […]

Band 7+

The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The layout illustrates the construction of the Orion spaceship before assembly and after take off. Overall, it is clear to see that there is a beginning version of craft without new features that will be added after launch. In the unassembled rocket stage, the construction is stayed vertically and had 3 main parts. At the […]

Band 6+

The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The provided diagrams display the parts of the Orion spacecraft before and after it is assembled. Overall, the rocket consists of several separate parts, whereas the assembled spacecraft is a single, more compacted construction. The fuel tank, engine and boosters are not visible outside of the final version, while solar panels are the only new […]

Band 7+

The diagrams below show the parts of the Orion spacecraft before and after the assembly process. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The diagrams illustrate the main components of the Orion rocket before assembly and the configuration of the spacecraft after assembly. Overall, the initial design consists of a tall central structure flanked by two solid rocket boosters, whereas the assembled spacecraft is shown as a compact unit comprising the crew and service modules, together with the […]

Band 9

See All

The image below shows the different stages involved in making paper. Write a 150-word report explaining the information given below.

The picture illustrates the different stages involved in paper process. Overall, producing paper involves many stages, starting with cutting timbers and sending them into the factory to produce ready paper materials, and ending with screening and cleaning the processed paper. Initially, many seedlings were planted by environment protectors in forests. After those seedlings become large […]

Band 5+

The diagram below shows how driving license is obtained. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The diagram illustrates the procedure required for obtaining a driving licence Overall, the process consists of several steps beginning with vigting the center and completing an application from. applicants must pass an eye test ,a written test and a driving test before they can receive their licence. First, applicants need to visit the center and […]

Band 4+

The diagram illustrates the process by which paper is manufactured from wood.

The diagram gives detailed information about the process in which paper is produced from wood. Overall,it is clear that there are eight steps in the production of paper,starting with logging in a forest and ending with rolling the paper.It is also mentioning that the process requires both labour-intensive and machine-driven jobs,the latter taking up the […]

Band 6+

The image below shows the different stages involved in making paper. Write a 150-word report explaining the information given below.

The diagram illustrates the production of paper involved in different stages. From an overall perspective, the diagram consists of three main stages. It begins with cutting the timber by a special machine, and continues with chipping the timber. At the end of the process involves two stages ; screening and cleaning, and making the paper. […]

Band 7+

See All

Check Your Answer On This Topic?

Generate A Band-9 Sample Answer?

Overall Band Score

Task Response

Coherence & Cohesion

Lexical Resource

Grammatical Range & Accuracy

Answers On The Same Topic:

Other Topics:

Plans & Pricing

Free

Premium