The flow charts describes how one can use wood pellet stove and wood pellet boils to warm a house.
Generally, the first diagram depicts how aad water is heated to Generate warmth. On the other hand, the 2nd chart shows how hot are gets heated up and generates heat.
When using pellet boiler, the wood chops are put in a hopper. Next, the move into a furnace where they are burned to produce heat. Consequently the cold water is heated. The word is burned into ash which moves into a receuser. finally the heated water goes through pipas. Overall, all rooms are served with the heated water thus generating warmth.
on the other hand, the wood pellets are dropped into a fuel hoper. Which is connected with a fuel feeder. The pelleti enter the heating chamber burning occurs thereafter, wood ash is separated and collected in a ash pan. Moreover, the hot air moves up to the combustion fan. To add on the combustion fan chamber is fitted with a temperature control pannel that regulates the warmth. Lastly, on the rear panal an exhaust pipe is connected to remove and clear unwanted fumes.