Process Diagram

Band 6+: The diagram below shows the leather making processSummarise the information by selecting and reporting themain features, and make comparisons where relevant.

See all user-written answers on this topic

Image for topic: The diagram below shows the leather making processSummarise the information by selecting and reporting themain features, and make comparisons where relevant.

Our system will evaluate the answer based on this AI-generated description.

The image outlines the leather making process beginning with 1. Delivery of animal skin from farm, moving to 2. Sorting into small or large, followed by 3. Trimming, 4. Adding salt, 5. Curing for 30 days, 6. Soaking with water for 12-24 hours, 7. Removing hair using knife, 8. Pickling with acid, 9. Tanning with chemicals for 48 hours transitioning to 10. Colouring and softening aided by oil, 11. Drying, culminating in 12. Waxing.

Given the complexity of the image, the above description may not be entirely accurate.

Skyrocket your IELTS band score by 1-2 points in under a month with our premium plan!

Check it out

Note: Both the topic and the answer were created by one of our users.

The image illustrates the process of making leather.

Overall, the whole process follows a twelve-step sequence, starting with delivery of animal skin to the factories and ending with waxing leather . Clearly, the entire procedure is mostly man-made with minimal machine intervention

In detail, the initial step of the leather making process involves the delivery of animal skin from farms to the factories. After that, workers sort out skin according to its size: small or large. Subsequently, it undergoes throw trimming and salting.Once all preparations are over, skin curls for 30 days.

In the seventh phase, the skin, after being soaked in water for 12-24 hours, has its hair removed by using a knife. Next, a material is subsequently pickled with usage of salt and acid. Following this, the skin is tanning using chemicals for two days. After chemical procedure, the material coloured and softened. In the final steps, the animal skin is dried and waxed by worker.

Word Count: 158

Check Your Answer On This Topic?

Check My Answer

Generate A Band-9 Sample Answer?

Generate A Sample

Overall Band Score

(+/- 0.5)

Vocabulary Complexity:
B2 - Upper Intermediate
Opt for even more advanced words when appropriate.

Grammar Mistakes: N/A

Vocabulary Repetition:

process: 3

animal: 3

after: 3

Try using synonyms for the above words

Task Response

The report covers all the main stages of the process and provides a clear overview. The sequence of events is logically organized, and the use of cohesive devices helps the flow of information. To improve, ensure greater precision in word choice (e.g., 'skin curls' instead of 'curing') and maintain consistent grammatical accuracy, particularly regarding passive voice constructions and article usage. Some phrasing is slightly awkward, but the overall description is sufficient to meet the task requirements.

Coherence & Cohesion

The report follows a logical progression and uses a variety of cohesive devices (e.g., 'Subsequently', 'In the seventh phase', 'Following this'). However, there are some issues with the flow of information. For instance, the transition between the curing stage and the soaking stage is a bit abrupt. To improve, ensure that each sentence flows naturally into the next by using more varied transitional phrases and ensuring that the logical connection between steps is explicitly clear.

Lexical Resource

The vocabulary used is generally appropriate for the task (e.g., 'sequence', 'undergoes', 'culminating'). However, there are some awkward phrasing choices and word usage errors, such as 'skin curls' (which likely meant 'cures') and 'with usage of salt and acid'. To reach a higher band, aim for more precise technical vocabulary and avoid repetitive structures. Ensure that the verbs used to describe the process are accurate to the context of manufacturing.

Grammatical Range & Accuracy

The report attempts a range of structures, including passive voice, which is essential for process descriptions. However, there are several grammatical inaccuracies that hinder the quality of the writing. Examples include 'the material coloured and softened' (missing the auxiliary verb 'is') and 'the skin is tanning' (should be 'is tanned'). There are also issues with article usage and subject-verb agreement. Focus on mastering the passive voice construction (be + past participle) as it is the standard for describing industrial processes.

Answers On The Same Topic:

The diagram below shows the leather making processSummarise the information by selecting and reporting themain features, and make comparisons where relevant.

The given diagram provides information about how animal skin is turned into leather. Overall, the process involes 12-stages, the process begins with delivery of animal skin from a farm. finally, the animal skin can be ready after waxing. The process starts with delivery of skin from a farm, then the skin is left to sorting, […]

Band 6+

The diagram below shows the leather making processSummarise the information by selecting and reporting themain features, and make comparisons where relevant.

The chart illustrates the process of leather fabrication, step by step. Overall, the leather is made out of 12 stages, and it contains man-made work and special equipments. Starting from farm, ending with waxing the feather. Starting of with farm that delivers the dead animals skin, and sorting them into two categorise; large and small. […]

Band 5+

The diagram below shows the leather making processSummarise the information by selecting and reporting themain features, and make comparisons where relevant.

The diagram illustrates the various stages involved in manufacturing leather. Overall, the process consists of twelve main stages. It begins with delivered leather and ends with waxing leather. To begin with, animal skins are delivered from farm to factory. When animal skins are sorted into small and large sizes, they are trimmed by human labour […]

Band 7+

The diagram below shows the leather making processSummarise the information by selecting and reporting themain features, and make comparisons where relevant.

The process diagram illustrates how leather is produced through a series of industrial stages, beginning with delivery directly from farms and ending with waxing. Overall, it is clear that skin undergoes multiple stages, including chemical treatments such as tanning, pickling, colouring and softening, before being finished into a commercial product. First, raw animal skins are […]

Band 7+

See All

The process diagram shows the mass manufacturing of coconut oil. Summarise the information by selecting and reporting the main features and make comparisons where relevant.

The given diagram illustrates the way in which coconut oil is made. Overall, the process consists of 10 stages, starting from picking coconuts from a palm and ending with the shipment of different products that contain it. Taking a closer look, the first step is to pick up the coconuts that are already ripe enough. […]

Band 8+

The diagrams below show the structure of a simple solar panel and how it works. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

The illustration shows the construction of a simple solar panel as well as gives information about its working process. Overall, there are two kinds of solar panels presented by the diagram: the one used for heating air, the other – for heating water. The most noticeable feature is that the structure of both solar panels […]

Band 7+

the diagram illustrates the process of lithography, a method of printing newspapers

The diagram demonstrates how newspapers are printed using a technique known as lithography. This process comprises six stages, beginning with the preparation of the printing plate and ending with the drying of the printed newspapers, each of which will be described below. First of all, the paper is attached to the roll, which rotates clockwise […]

Band 8+

the diagram below shows the process by which paper is manufactured and recycled.

the diagram bellow illustratethe the process by which paper is manufuctured and recycled step by step. overall,its clear from the graph that the factory has the same raw matetial for both types of papers,and that material is made by cruched wood its called pulp. according to what its shown , first thing they do is […]

Band 4+

The diagram shows how to make jam from the fruit. Summarise the information by selecting and reporting the main features, and make comparison where relevant.

The diagram illustrates the steps involved in making jam out of the fruit. Overall, it can be seen that the process of making jam includes seven stages, initiating from washing fruits completing with a family is having breakfast. Initially, fruits are washed ( 4kg ) under the running water from the tap, after which fruits […]

Band 6+

The diagram shows how chocolate is produced. Summarize the information by selecting and reporting the main features and make comparisons where relevant.

The process describes how is made liquid chocolate from cocao beans. Overall, it is readily apperant that there are 10 main steps. The process begins with growing cocao trees and harvesting, finishes with producing liquid chocolcate. Initially, cocao trees are grown in South America, Africa and Indonesia. Following this ripe red pods are harvested and […]

Band 4+

See All

Check Your Answer On This Topic?

Generate A Band-9 Sample Answer?

Overall Band Score

Task Response

Coherence & Cohesion

Lexical Resource

Grammatical Range & Accuracy

Answers On The Same Topic:

Other Topics:

Plans & Pricing

Free

Premium